Phoenix Contact 2403459, User Manual

Page: 29 / 64

Installation and Commissioning
107460_en_00 PHOENIX CONTACT
29
The operating device allows you - by starting the cockpit during the startup phase - to make
changes to the device configuration.
Cockpit at system startup To start the cockpit, do the following:
1. Wait during the startup phase until the following dialog is displayed.
Figure 2-19 Cockpit startup phase
2. Press the button to start the cockpit before the progress bar is down.
You can customize the language of the cockpit interface with the Regional settings menu
item.
3. Press the button Regional Settings .
4. Select the desired language.
5. Confirm your selection with the green check.
Using desktop icon to
start cockpit
You can start the cockpit via the desktop icon at already started operating devices with ac-
tive desktop:
1. Briefly press twice on the desktop icon.
2. Press the button to start the cockpit before the progress bar is down.
You can customize the language of the cockpit interface with the Regional settings menu
item.
3. Press the button Regional Settings .
4. Select the desired language.
5. Confirm your selection with the green check.