Phoenix Contact 1184146 User Manual Download Page 6

Page: 6 / 52

THERMOMARK GO.K

6 / 50

PHOENIX CONTACT

109432_en_00

1.3

Field of application

The THERMOMARK GO.K is a portable thermal transfer printer for industrial use.

The thermal transfer printer prints self-adhesive and non-adhesive labels and

shrink sleeves for marking electrical components.
The THERMOMARK GO.K uses special material cartridges that contain the mate

rial as well as the corresponding ink ribbon. Only use material cartridges that are

provided for the THERMOMARK GO.K by Phoenix Contact.

1.4

Safety notes

Hazard to operational safety

Incorrect operation or modifications to the device can endanger your safety or

damage the printer. Do not repair the device yourself. If the device is defective,

please contact Phoenix Contact.
This device is not suitable for use at locations where children might be present.

Explosion hazard, fire hazard, and health hazard if batteries are used incor

rectly

– Only use dry batteries in a proper condition. Only the associated battery is suit

able for battery operation (THERMOFOX/ACCU, 0805009).

– Never damage the batteries (e.g., by throwing, pressing on the battery, or us

ing sharp objects). Never expose the batteries to high levels of heat (e.g.,

caused by fire or sunlight). Never let the batteries come in contact with mois

ture or salt water.

– Pay attention to the correct polarity when inserting the batteries.

– Only charge the battery in the THERMOMARK GO.K or in the provided char

ger (THERMOFOX/CHARGER, 0805012). Do not use any other chargers,

e.g., cigarette lighter socket in the car.

– Temperature range when charging the battery: 0°C ... 45°C

– Store the battery separately in a dry and cool place.

– Never expose batteries to an extremely low air pressure.

Summary of Contents for 1184146





















































Search results

Summary of Contents for 1184146

Reviews:

Phoenix Contact 1184146, User Manual, Page: 6 / 52

Search results

Summary of Contents for 1184146

Reviews: