manualshive.com logo in svg

Phoenix Contact 1184146, User Manual, Page: 5 / 52

Share
Download
Phoenix Contact 1184146 User Manual Download Page 5

For your safety

109432_en_00

PHOENIX CONTACT

5 / 50

1 For your safety

Read this user manual carefully and keep it for future reference.

1.1

Identification of warning notes

1.2

Qualification of users

This user manual is aimed at those persons who are familiar with the relevant 

safety concepts for handling electrical machines. Only those persons who can 

identify hazards may start up, operate, and maintain the device.

This symbol indicates hazards that could lead to personal injury.

There are three signal words indicating the severity of a potential injury.

DANGER

Indicates a hazard with a high risk level. If this hazardous situation is not avoided, 

it will result in death or serious injury.

WARNING

Indicates a hazard with a medium risk level. If this hazardous situation is not 

avoided, it could result in death or serious injury.

CAUTION

Indicates a hazard with a low risk level. If this hazardous situation is not avoided, 

it could result in minor or moderate injury.
This symbol together with the 

NOTE

 signal word warns the reader of actions that 

might cause property damage or a malfunction.

Here you will find additional information or detailed sources of information.

Summary of Contents for 1184146





















































Reviews:

No comments