Phocos CIS-N-LED 1050 mA, User Manual

Page: 25 / 95

LED Driver Description

Output voltage up to 49 V

5 to 15 LEDs in series for 12 V system, 10 to 15 LEDs in series for 24 V system

Nominal output current: 350 mA, 600 mA, 700 mA, 1050 mA, 1400 mA, 2800 mA
(depending on the type)

Two timer inside to control LED brightness

PIR Input: Switches the LED driver to the nominal output current (100% brightness). To be
used with an external motion detector.
Dimming Function (output "logics")
No dimming Dimming on Load off
Timer 1 on on off
Timer 2 on off N/A
The timer and dimming settings can be adjusted using the CIS-CU-LCD (Infrared remote
control) or MXI-IR (Infrared to USB adapter) and CISCOM (PC-program).
PIR-Dimming override input: (0-0.5 V Off, 4-30 V On)
Input for a signal from a motion sensor (PIR), to override the dimming and set the light to full
brightness in case a person is detected.
In this way, one can set a low dimming level to ensure a minimum light level, for sufficient
orientation and to save energy.
When a motion is detected, the light is switched to 100%.
23