Phocos CIS-MPPT 50/10, User Manual

Page: 23 / 74

Factory Settings
You can configure CIS-MPPT 50/10 charge controllers via the Remote Control Unit (CIS-CU). See CIS-CU manual for details.
Factory setting
Load mode Standard controller (night light off)
Low voltage disconnect SOC4
Battery type Gel
Night light level 8.0/16.0 V (1)
Load 1 evening hours 0 h
Load 1 morning hours 0 h
Dimming evening hours 0 h
Dimming morning hours 0 h
Dimming value 50 %
(1) PV panel open circuit voltage: Day level = Night level + 1.5/3.0 V
Night light level
The controller recognizes "day" and "night" based on the solar PV array open circuit voltage. The daylight threshold can be modified according to the
requirements of the local conditions and the solar PV array used.
To find the exact values, we recommend measuring the PV solar array "open circuit voltage" at twilight and when the controller is expected to switch
the loads "on" or "off". This value (the closest setting available) can then be set according to the description presented in the programming section.
21