Philips VTR8210, User Manual, Page: 56 / 92

56
EN
Please note the instructions in this section when you make
the first video recording with your
Video
Tracer!
5 Video Recording
(1)On the Preview interface, press the “Video Record” button
to start recording. The device will vibrate twice briefly, and
the state indicator flickers red.
(2)Long press “ ” or “ ” to zoom in and out the preview
interface.
(3)When recording at night, in a low light environment or
of the infrared is in manual mode, please long press the
" " button to change to night recording mode. The
screen will become black/white.
(4)Press the " " button to turn on the laser light,
which can be used to locate recording area.
(5)When recording at night or in a low light environment,
press the " " button to gain more light.
(6)Press the "Capture" button to capture the current video
recording picture.
(7)Press the " " button to mark the file as an important
document, so the file will not be covered when loop
recording or be deleted on the device. It can only be
deleted by formatting the device or through computer.
(8)Long press “Record” button to switch to voice recording
mode.
(9)Press the “Video Record” button again to end the
recording. The device will vibrate twice briefly, the red light
goes out, and the device returns to the preview interface.
The state indicator turns green.
Recording Interface Reference:
Illustration of Video Recording Interface:
Note
LASER RADIATION
AVOID EYE EXPOSURE TO DIRECT
RADIATION
CLASS 2 LASER PRODUCT