Philips VTR8210, User Manual

Page: 66 / 92

66
EN
12 Remote Control (Optional)
Remote control allows the user to control the device
remotely. The supplied remote control offers remote
shutdown, voice record, video record, camera, and other
functions.
12.1 Remote Control Enable/Disable
12.2 Matching the Remote Control
1 When the device is off, if the white lamp for the remote
control indicator goes out, the remote control is disabled.
At that time, press the Menu button for 3 seconds. When
the white lamp is lit, later slowly flashes and the remote
control is enabled.
2 When the device is off, if the white lamp on the remote
control stays on and flicker slowly, the remote control
is still turned on. Press the Power On/Off button on the
remote control to remotely control the device.
P
ress the
Menu button for 3 seconds to turn off the remote control.
When the device is off and the remote control is disabled,
press the Menu button for 8 Sec to make the white lamp for
remote control indicator flicker rapidly. The Power On/Off
button on the remote control must be pressed within 3 Sec.
When the white lamp stops flickering and stays on, the code
match is completed. If the device will automatically start, the
code match is successful. If not, code match failed.
before using for the first time!
If the red indicator is flickering all the time when the
remote control is working after the code is matched,
it means it is low battery. Please charge the remote
control.
The remote control can be enabled and disabled only
when the audio and video recorder is off.
Only if the white lamp for the remote control indicator
slowly flashes, then the remote control is enabled.The
red indicator on the remote control flashes once when
taking photo, twice when audio or video recording are
enabled, and three times when saving recorded audio or
video files.
The remote control allows horizontal control without a
barrier at any angle within 10 meters.
The remote control of the device should be enabled
before using the remote control to operate the device.
Please charge the remote control for at least 2 hours
Note
Note
•
•
•
•
•
•