Philips VTR8210, User Manual

Page: 55 / 92

54
EN EN
55
Eng
lish
4.3 PC Connection
Note
Note
•
•
Recharging may be conducted when the device is either
off or on. Under normal circumstances,the device will be
fully recharged within 4 hours when it is off, or about 6
hours when it is turned on.
When moving files to or from the recorder, please do not
disconnect the device from the computer.
Please connect the device with PC with the USB cable
when the device is power on or long press the power
button for 3 seconds after connecting the device to PC.
If you need to format the TF card in the range of 16GB to
64 GB, the file system option must choose FAT32 to form
at. If the card capacity is 128GB, the file system option m
ust be selected for exFAT for formatting. NTFS format ca
n not be used or the machine will not be able to record.
4.2 Recharge
1 The device has a built-in high-capacity battery, the factory
is equipped with a charger and data cable.
2 The device can be connected to a PC using the USB
cable. When recharging, the indicator remains green.
When the indicator goes out, the device is fully
recharged.
3 The device can be connected to the recharger using
the USB cable. When recharging, the indicator remains
green. When the indicator goes out, the device is fully
recharged.
4 Lithium battery is used for the remote control. Charging
the device with the equipped charger or connecting
the device to PC with a USB cable. During the charging
indicator is green, and it will go off if the device is fully
charged.
The Video Tracer can be used as a USB mass storage to
conveniently store, back up and move files. The Video Tracer
can be linked to a computer with a USB cable. Please be
noted that VTR8210(DSJ-4J)must save, copy, move and delete
files via the FMS.as shown in the following picture.
•
•