REMOTE
Can be selected ON or OFF to
CONTROL
allow control of the system from
the IR Remote Control accessory.
SYSTEM
Can be selected from an address
ADDRESS
of 1 to 8 to avoid multiple system
switching with one IR Remote
Control.
CONTROL AT
Can be selected ON or OFF to
SLAVE
allow control of the system from
the Slave Monitor accessory.
SETUP CAMERA
For every connected camera a camera configuration
menu can be selected (activated).
M A I N M E N U
S Y S T E M S E T T I N G S
I N S T A L L A T I O N
S E T U P C A M E R A 1
T I T L E
1
B A C K L I G H T C O M P E N S A T I O N
O F F
W H I T E B A L A N C E
A U T O
F I E L D O F V I E W
1
M I C R O P H O N E
O N
M O T I O N A R E A
M O T I O N S E N S I T I V I T Y
D I S P L A Y M O T I O N O F F
TITLE
Allows you to enter a camera title
(max. 8 characters).
BACKLIGHT COMPENSATION (BLC)
Backlight compensation:
BLC OFF - The camera
Automatic Light Control (ALC)
responds to the average content of
the entire video picture.
BLC ON - The camera ALC
responds pre-dominantly to the
center of the picture, shown by
the diagram. If an object of
interest falls inside the BLC area,
its visibility will remain relatively
constant even if the background
illumination varies.
WHITE BALANCE
White balance is where the
camera automatically matches the
video color to the white
(reference) area of the image. The
different options are:
FIXED - keep the white balance
settings which are currently used.
AUTO - White balance is
automatically set.
RECALCULATE - Set the white
balance to automatic for 5
seconds and then back to fixed.
Note: Recalculate is only available
when current setting is FIXED.
FIELD OF VIEW
(Range 1: 1.33: 1.66 : 2: default
is 1). Adjust the field of view
using digital zoom in the camera
to ensure complete coverage of
the object within the viewing
angle of the camera lens.
MICROPHONE
Select the microphone ON/OFF.
MOTION AREA
Allows you to define the area size
for motion detection.
MOTION
Allows you to define the
SENSITIVITY
sensitivity of motion detection.
This enables you to detect objects
like a person running across the
motion area but will not raise an
alarm if there is a small
movement (detect humans but no
birds).
DISPLAY
This allows you to view where the
MOTION
motion has been detected by
displaying a series of movement
indicators on the monitor screen.
2.4.8 Motion Sensitivity
M A I N M E N U
S Y S T E M S E T T I N G S
I N S T A L L A T I O N
S E T U P C A M E R A 1
M O T I O N S E N S I T I V I T Y 1
L E V E L
M O T I O N I N D I C A T O R
R E S E T I N D I C A T O R
LEVEL
Sets the level (the amount) of
motion detection.
MOTION
Displays the set level of motion
INDICATOR
detection.
RESET
Resets the motion detection
INDICATOR
indicator to the current setting.
Set motion alarm as follows:
1. Reset indicator.
2. Set level on minimum.
Section 2 - Installation
10
P H I L I P S O B S E RVAT I O N S YS T E M
V S S 7 3 9 0 / 0 0 T S W I T C H E R
