Philips VRX342AT Owner'S Manual Download

Page: 44 / 52

44 Special Effects Playback

Forward and Reverse Searching (SP/LP/SLP)

When in Play mode, press and release the F.FWD button or
the REW(ind) button. A fast forward or reverse picture search
will begin.

To return to playback, press the PLAY button.

Super High Speed Searching (LP/SLP)

When in Play mode, press the F.FWD button or the REW
(ind) button, then press again. The VCR will now search in
super high speed.

To return to normal playback, press the PLAY button.

Viewing a Still Picture

When in Play mode, press the PAUSE/STILL button. A still
picture (frozen image) will appear on-screen.

To release the still picture and return to normal playback, press
the PLAY button or press the PAUSE/STILL button
again.

Viewing a Slow Motion Picture

When in Play mode, press the SLOW button. The tape will
play in slow motion.

To release Slow mode and return to normal playback, press the
PLAY button or press the SLOW button again.

• Slow and Still modes will automati-

cally switch to Stop mode after five
minutes to protect the VCR and the
tape from damage.

• SP/LP/SLP means this feature will

work with tapes recorded in
Standard Play, Long Play, or Super
Long Play.

• LP/SLP means this feature will work

with tapes recorded in Long Play or
Super Long Play. For details about
tape speed, see pages 34 and 48.

Helpful Hints

REW

PLAY

POWER

VCR PLUS+

/ENTER

SPEED

VCR

TIME SEARCH

MUTE

CABLE

/DSS

VCR/TV

CHANNEL

VOLUME

REC/OTR

STATUS/EXIT

MEMORY

SLOW

PAUSE/STILL

CLEAR

EJECT

STOP

F.FWD

–

+100

Summary of Contents for VRX342AT





















































Search results

Summary of Contents for VRX342AT

Reviews:

Related manuals for VRX342AT

Brands by name

Popular brands

Philips VRX342AT, Owner'S Manual

Search results

Summary of Contents for VRX342AT

Reviews:

Related manuals for VRX342AT

Brands by name

Popular brands