Philips VR620/07, Manual

Page: 49 / 66

45
Programming a recording with
'TURBO TIMER'
With this function, programming a recording that takes place within the next 24 hours, will be
quick and easy. The following pre-set information will appear in the display when you programme
a recording using 'TURBO TIMER'.
Programme number = the programme number currently selected (TV channel)
Start time = current time
End time = current time +2 hours
BBC1
1
Press TURBO TIMER on the remote control.
The current set programme number will appear in the display, for
instance, '
PROG.
01
'. If required, you can change this using
;q
P or
P
r=
.
a
'
CLK
' will flash in the video recorder display
b
This display means that the video recorder clock is not set correctly. Please
read the section 'Setting the time and date' in chapter 'Installing your video
recorder'
20:00
2
Press TURBO TIMER .
The current time (= start time) will appear in the display, for instance,
'
START
20:00
'. If required, you can change this using
;q
P or
P
r=
.
22:00
3
Press TURBO TIMER .
The end time will appear in the display, for instance, '
END
22:00
'.
'
END
22:00
'. If required, you can change this using
;q
P or P
r=
.
4
Press TURBO TIMER .
'
OK
' will briefly appear in the video recorder display. Programming is
now complete.
5
Insert a cassette with an intact security tab (unprotected).
Using Tape List
Enter the cassette number with the number buttons
0-9
.
The cassette is being checked. You can find more information on the 'Tape
List' in the chapter 'Tape List'.
ENGLISH
Programming a recording (TIMER)