Philips VR620/07, Manual

Page: 32 / 66

28
a
The counter does not move
b
This occurs when there are no recordings on a portion of a tape.
Therefore, the video recorder cannot receive any information from the
tape. This is not a fault in your machine.
a
The display/the screen shows '
-0:01:20
'
b
If you rewind a cassette from the tape position '
0:00:00
', the counter will
show for instance, '
-0:01:20
' (the cassette will be rewound to 1 minute
and 20 seconds before '
0:00:00
').
a
'-:--' is displayed in the '
REMAIN
' counter
b
This counter will automatically recognise the length of the tape. In addition,
when you put in a cassette the video recorder must first calculate the time
played. Therefore, '-:--' appears first and only after the tape has been
running for a few seconds will the correct playing time be shown.
Searching for a tape position with picture
(scanning)
0:30:
21
1
While a cassette is playing, press
H
(reverse) or
I
(forward) one
or more times. This will, for example, appear in the display:
2
To stop at a certain place on the tape, press PLAY
G
.
Decreased picture quality
Scanning interferes with the picture quality. The sound is switched off. This is
not a fault in your machine.
Still picture / slow motion
0:00:
02
1
During playback, press STILL
R
to stop the tape and display a still
picture. This will, for example, appear in the display:
2
Each time you press STILL
R
, the picture will advance one frame.
3
When you hold down the STILL
R
button, the tape will be played
in slow motion.
4
When you press
I
several times, you have a choice of several
playback speeds for slow motion.
5
To continue playback, press PLAY
G
.
Playback