Philips VL550, User Manual

Page: 34 / 86

VARI
❋
LITE - S
ERIES
550 W
ASH
L
UMINAIRE
U
SER
’
S
M
ANUAL
1 8 1 6 N o v e m b e r 2 0 1 0 0 2 . 9 6 8 3 . 0 0 0 1 0
Installing in Truss:
Step 1. Using two people, lift luminaire into mounting position.
Step 2. Secure in place with truss hook. Ensure truss hook
hardware that locks hook in place (e.g. wing bolt) is
properly tightened and that luminaire is fully supported.
Step 3. Attach safety cable (as required) as follows:
a. Connect end of cable to luminaire cable mounting
hole on front of foot.
b. Loop at least once around truss/pipe and attach other
end of cable to cable mounting hole.
Figure 2-3: Safety Cable Installation
Step 4. Make sure service tilt and pan locks are disengaged so luminaire moves freely.
Step 5. Connect power and data cables according to procedure given in “Connecting Data and
Power” on page 19 .
Safety Cable :
Recommended for hanging installations.
May be required by local codes. Safety
Note:
Some components not shown for clarity
cable is sold separately.
Base
(Foot)