Philips VL550, User Manual

Page: 65 / 86

M
ENU
S
YSTEM
: M
ENU
O
PERATION
4
0 2 . 9 6 8 3 . 0 0 0 1 0 1 6 N o v e m b e r 2 0 1 0 49
Function Definitions
Each menu item is listed in the first column by its display abbreviation. The abbreviations appear in
alphabetical order as opposed to their position in the menu display sequence for easy reference.
Table 4-2: Menu Function Definitions
Display Definition Purpose
10Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
100V 230V IGBT Dimmer
Setting
( DIMMER ) setting - for setting/identifying the internal IGBT dimmer to 100V
(For use
with the Internal 120V IGBT Dimmer Only)
120v 120V IGBT Dimmer
Setting
( DIMMER ) setting - for setting/identifying the internal IGBT dimmer to 120V
(For use
with the Internal 120V IGBT Dimmer Only)
230v 230V IGBT Dimmer
Setting
( DIMMER ) setting - for setting/identifying the internal IGBT dimmer to 230V
(For use
with the Internal 230V IGBT Dimmer Only)
30sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address Address Accesses functions for setting luminaire starting address in DMX ( DMX ) controlled
systems.
ALL SEQ All Sequence Performs all tests in sequential order.
Cal ON On after Calibration Configures arc luminaire so that lamp will strike after calibration procedure is com-
plete.
CD CD Lamp Selects to CD Lamp Setting (VL550CD models only)
Chan XX DMX Channel Specifies DMX channel for display of current data value.
ChgLu-
mID
Change the luminaire
ID number
Allows access to change or set the luminaire ID number.
Configure System
Configuration
Accesses functions for setting lamp start up, pan/tilt, Menu Display, changing
luminaire ID, and resetting luminaire default values.
Cyan Cyan Color System Specifies Cyan color system for manual control ( Manual ) or for testing ( Test ).
Data DMX Data Accesses function for displaying DMX data by channel number and type. Also refer-
ences DMX address.
Diffuser Diffuser Specifies diffuser function for manual control ( Manual ) or for testing ( Test ).
Dimmer Dimmer Specifies dimmer function for manual control ( Manual ) or for testing ( Test ).
Dimmer
Curves
Dimming Curve
Selection
Specifies dimmer curve selection (Linear, Square Law, JATET A, or JATET B).
Disable Disable Disables a function.
Display Display Illumination Accesses options for Menu Display on and off times.
DMX DMX Accesses functions for setting DMX mode or pan/tilt options.
Download Download Downloads program to luminaires.
Enable Enable Enables a function.
Encoder Encoders Accesses pan or tilt encoder for diagnostic testing ( Test ).
External External Dimmer Sets luminaire to operate with an external dimmer.
Fan Mode Fan Mode Sets the luminaires to operate normally ( Auto -fans engage when preset thermal
limits are surpassed) or off ( Off ).
Fans Fan Speed Tests luminaire’s fan speed (0 = off to 7 = fastest).