Philips Vari-lite VL3015LT User Manual Download Page 84

Page: 84 / 90

VARI

❋

LITE VL3015LT S

POT

UMINAIRE

SER

’

ANUAL

13 December 2012

02.9698.0002 0

Cleaning Optics, Filters and Gobos

WARNING:

Remove power from luminaire before performing maintenance.

WARNING:

Acetone is a harsh cleaning agent and solvent. Acetone is very flammable. Please

handle acetone according to manufacturer’s safety instructions and precautions.

The front lens, optics/color filters, and reflector may require cleaning after extended use.
•

FRONT LENS: Use a isopropyl alcohol with a soft, lint-free cloth to clean the front lens.

•

OPTICS/COLOR FILTERS/ GOBOS: Use Acetone or Isopropyl Alcohol along with a soft, lint-
free cloth to clean the optics/color filters.

•

REFLECTOR: Use Acetone or Isopropyl Alcohol along with a soft, lint-free cloth to clean the
reflector.

CAUTION:

Do not continuously rub color filters or reflector - it may damage or remove the optical

coating.

Summary of Contents for Vari-lite VL3015LT


























































































Search results

Summary of Contents for Vari-lite VL3015LT

Reviews:

Related manuals for Vari-lite VL3015LT

Brands by name

Popular brands

Philips Vari-lite VL3015LT, User Manual

Search results

Summary of Contents for Vari-lite VL3015LT

Reviews:

Related manuals for Vari-lite VL3015LT

Brands by name

Popular brands