Mechanical Instructions
EN 8
4.
4.3
Model T260XW03V1
4.3.1
Control Board
Disassembly
1.
Place the panel face down on the foam bars, and locate the
Control board.
2.
Remove the four screws of the metal cover: start with the
right-down one, then the left-up, one, then the right-up one
and finally the left-down one.
Figure 4-12 Cover screws removal
3.
Lift the cover from the Control board.
4.
Carefully disconnect the flat cable/FPCs from their
connectors.
Figure 4-13 Unplug FPCs
5.
You can now remove the Control Board.
Reassembly
To reassemble, perform all processes in reverse order.
Important: Be sure to insert the FPCs correctly: the (white) line
must be invisible when inserted correctly (see figure below).
Figure 4-14 Correct FPC insertion
I_17791_0
3
7.ep
s
240
8
0
8
I_17791_0
38
.ep
s
240
8
0
8
H_16900_007.eps
110707
