Philips SW175, Manual

Page: 9 / 44

- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Charging
Charge the shaver before you use it for the first
time and when the appliance starts to work more
slowly.
Note: First time charging or charging after a long
period of non-use requires 90 minutes of charge
time.
Charging takes approx. 10 hours. A fully charged
shaver has a shaving time of up to 40 minutes.
Note: You cannot use the shaver while it is
charging.
Note: Depending on your shaving/styling behavior
and beard type, the operating time may vary over
time.
Charging with the supply unit
1 Make sure the shaver is switched off.
2 Put the small plug in the shaver and put the
supply unit in the wall socket.
The light on the supply unit lights up to show
that the shaver is charging.
Note: The light on the supply unit does not
change color and does not go out when the
shaver is fully charged..
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
shaver.
Using the shaver
Always check the shaver and all accessories
before using. Do not use the shaver or any
accessory if it is damaged, as this may cause
9
English