Philips StudioPower FC9080 SERIES, Directions For Use Manual

Page: 14 / 238

14
3 Pull at the cardboard tag to remove the full dustbag from the holder .
,
When you do this, the dustbag is sealed automatically.
4 Slide the cardboard front of the new dustbag into the two grooves of
the dustbag holder as far as possible.
5 Put the dustbag holder back into the vacuum cleaner.
Note: If no dustbag has been inserted, you cannot close the cover.
6 Push the cover downwards to close it.
Emptying the reusable dustbag (some countries only)
In some countries, this vacuum cleaner also comes with a reusable dustbag
that can be used and emptied repeatedly. You can use the reusable dustbag
instead of disposable dustbags.
To remove and insert the reusable dustbag, simply follow the instructions
in ‘Replacing the disposable dustbag’.
To empty the reusable dustbag:
1 Slide the clip off the dustbag sideways.
2 Shake out the contents into a dustbin.
3 To close the dustbag, slide the clip back onto the bottom edge of the
dustbag.
Cleaning and maintenance of filters
Always unplug the appliance before you clean or replace the filters.
Permanent motor protection filter
Clean the permanent motor protection filter every time you empty the
reusable dustbag or replace the disposable dustbag.
EnglISh
14