3
EN
Manual set up by code
selection
The replacement remote RRC has pre-
programmed the most updated IR code and
is ready to use. If it does not work, you can
manually select the code from our list that can
fit your TV.
Set up by code selection
1
Switch on your TV.
2
Press and hold
1
and
6
at the same time
for 5 seconds until the red LED is on.
3
Look up the available 5-digit code. The
most popular code is listed first. The
factory default code is
0
0
0
0
0
.
List of IR code for Samsung and Philips TVs
4
Enter the selected 5-digit code using the
digit buttons.
5
If the light is off, a valid code is saved.
Otherwise, the light will flash six times, and
then remains on for code re-entry.
Note
•
It is possible sometimes that your device only responds
to some of the buttons. In such case, set up with the
next code in the code list, and try operating your
device again. If there spill problem on code or key, you
can try to learn a key by learning faction if the remote
support learning function.
Samsung TV
00000
00001
00002
00003
00004
00005
00006
00007
00008
00009
00010
00011
00012
Philips TV
00100
00101
00102
00103
00104
00105
00106
00107
00108
00109
00110
00111
00112
Philips TV
00113
00114
00115
00116
00117
00118
00119
00120
