4
EN
Auto IR code search
1
Turn off your TV with stand-by power
2
Press and hold
1
and
6
at the same time
for 5 seconds until the red LED is on.
3
While pointing at your TV with the RRC,
press and release the PLAY button once,
it sends Power On/Off command of an IR
code from our list.
4
When the TV turn on (it might takes a
few seconds for some TV to power on),
you can try other keys (except PLAY and
STOP) to see if the TV response.
5
You can press STOP to confirm and exit
the search. If most of the other keys does
not work properly, turn off your TV and
press PLAY again to try the next code.
Note
•
It is possible sometimes that your device only responds
to some of the buttons. In such case, set up with the
next code in the code list, and try operating your
device again. If there spill problem on code or key, you
can try to learn a key by learning faction if the remote
support learning function.
