14
EN
English
15
EN
Ser
vice and suppor
t
FCC Compliancy
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference
received, including interference that may cause
undesired operation.
Note
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
4.1.3 Batteries
Will my settings be deleted when I replace the
batteries?
No. All user settings will be retained in the
remote control memory for 5 minutes.
Warning
The (included) batteries should not be
exposed to excessive heat such as sunshine,
fire or the like.
4.2 Need help?
We advise you to first read this user manual
carefully. It is provided to help you set up and
use the remote control.
If, however, you require extra information or
have additional questions about setup, usage,
spare parts, warranty, etc. of the SRP1103, you
can always contact us.
When calling our helpline, make sure to have
the SRP1103 at hand when you call, so that our
operators can help you determine whether the
SRP1103 is working properly.
You will find our contact details at the end of this
user manual.
The model number of your Philips universal
remote control is SRP1103/27.
Date of purchase:
......../ ......../ ........
(day/month/year)
For
online support
go to:
www.philips.com/welcome
• Click ‘Support’ and follow the on-screen
instructions.
