10
EN
English
11
EN
Using the univ
ersal r
emote contr
ol
3.2 Resetting a button to its
original function
If an improved button (see chapter
2.2.2
) still
does not function as expected, you can always
reset the button to its original function.
1
In the current
device mode, keep
digit buttons
and
pressed
simultaneously for 5
seconds
, until the
red Setup light lights up.
• The remote control is now in setup
mode.
2
Press digit buttons
, and , in
that order.
• After each
button press
the red Setup
light blinks once.
3
Press the button
that you wish to
reset
twice
. E.g. the
22
button.
• After each
button press
the red Setup light blinks once.
• The red Setup light will blink one
more time to confirm that the button
was succesfully reset to its original
function.
4
+ VOL -
...................... adjusts TV volume.
................................ previous program / Last /
Back.
................................. mutes TV sound.
+ CH -
....................... next / previous channel.
5
5
.................................. rewind.
2
.................................... play.
6
.................................. fast forward.
9
.................................... stop.
0
................................... record.
;
..................................... pause.
4
P
3
P
........................ previous (
4
P
) / next
(
3
P
) page / track in
various modes.
/ ....................... set your Thumb ratings.
6
............ digit buttons for direct
channel / track selection.
................................ used after direct channel
selection. Some devices
require
to be
pressed after channel
selection.
..........................
selects between one
and two-figure channel
numbers.
5 sec.
2 x
