Philips SPH8608, User Manual

Page: 8 / 40

8
2
Feed the cord through the cord channel.
3
Connect the PhotoAlbum to the charging
dock.
4
Connect the AC plug of the power cord to
a power supply socket.
»
If the PhotoAlbum is powered off, the
LED indicators under the left-right
slider and the OK button blink during
the charging process. When the built-
in battery is fully charged, the LED
indicators stop blinking.
3 Get started
Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Charge the built-in battery
Note
•
Charge the built-in battery before using the
PhotoAlbum for the first time. The fully charged built-in
battery lets you operate the PhotoAlbum for up to 1
hour.
Mode Charging time
On 3.5 hours
Off 6.5 hours
1
Connect the DC plug of the supplied
power cord to the
DC
jack of the supplied
charging dock.
EN