Philips SONICARE HealthyWhite 700 SERIES, User Manual

Page: 9 / 44

Note: When the brush head is attached, it is normal that there is a
small gap between the brush head and the handle.
Charging the appliance
1
Put the plug in the wall socket.
2
Place the handle on the charger.
- The battery charge indicator next to the battery symbol flashes
to indicate that the toothbrush is charging.
Battery charge indicator
The battery charge indicator shows the approximate remaining
battery charge . (Fig. 5)
Deluxe charge indicator (specific types only):
- Solid green: 50-100%
- Flashing green: 10-49%
- Flashing yellow: less than 10%
Standard charge indicator (specific types only):
- Solid green: 50-100%
- Flashing green: less than 50%
Note: When the battery is low, you hear 3 beeps after the completion
of the brushing cycle and the battery charge indicator flashes for 30
seconds.
Note: To keep the battery fully charged, you may keep your Philips
Sonicare on the charger when not in use. It takes 24 hours to charge
the battery fully.
Using your Philips Sonicare
Brushing instructions
1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle (45
degrees), pressing firmly to make the bristles reach the gumline or
slightly beneath the gumline. (Fig. 6)
Note: Keep the center of the brush in contact with the teeth at all
times.
9
English