Philips SONICARE HealthyWhite 700 SERIES, User Manual

Page: 10 / 44

3
Press the power on/off button to turn on the Philips Sonicare.
4 Apply light pressure to maximize Philips Sonicare’s effectiveness
and let the Philips Sonicare toothbrush do the brushing for you. Do
not scrub.
5 Gently move the brush head slowly across the teeth in a small
back and forth motion so the longer bristles reach between your
teeth. Continue this motion throughout the brushing cycle.
6
To clean the inside surfaces of the front teeth, tilt the brush handle
semi-upright and make several vertical overlapping brushing
strokes on each tooth.
Note: To make sure you brush evenly throughout the mouth,
divide your mouth into 4 sections using the Quadpacer feature
(see chapter ‘Features’).
7 Begin brushing in section 1 (outside upper teeth) and brush for 30
seconds before you move to section 2 (inside upper teeth).
Continue brushing in section 3 (outside lower teeth) and brush for
30 seconds before you move to section 4 (inside lower teeth) (Fig.
7).
8 After you have completed the brushing cycle, you can spend
additional time brushing the chewing surfaces of your teeth and
areas where staining occurs. You can also brush your tongue, with
the toothbrush turned on or off, as you prefer. (Fig. 8)
Your Philips Sonicare is safe to use on:
- Braces (brush heads wear out sooner when used on braces).
- Dental restorations (fillings, crowns, veneers).
Note: When the Sonicare is used in clinical studies, the handle
should be fully charged. Deactivate the Easy-start feature and for
areas where excess staining occurs, an additional 30 seconds of
brushing time can be spent to assist with stain removal.
White mode brushing instructions
The Clean and White mode consists of 2 minutes of Clean mode to
clean the whole mouth and an additional 30 seconds of White mode
to focus on the visible front teeth.
1 Brush the first 2 minutes as explained in section 'Brushing
instructions'.
10
English