Philips SONICARE elite e7000, Manual

Page: 10 / 68

2 Press the Dual Speed Control button briefly and note which
LED lights up.
3 Press and hold the Dual Speed Control button. Continue to
hold the button while the LEDs slowly cycle through the timing
interval setting options:
C
◗
Green LED in position 4: Programmable Quadpacer active
(factory default setting).
C
◗
Green LED in top (5th) position: 2 1/2 minute setting - the
Programmable Quadpacer active with an additional 30-second
timing interval.
C
◗
Yellow LED in bottom (1st) position: no timing intervals set - the
Quadpacer not active.
4 To program the desired setting, release the button when the
LED corresponding to your choice lights up.
B
Note: Selecting 2 1/2 minutes brushing time reduces the number of
brushings available from a charged battery.
Dual Speed Control (specific models only)
The Dual Speed Control feature allows you to choose between
2 speed settings: Normal speed for optimal brushing performance, or
Reduced speed when an even more gentle brushing action is desired.
Each time you switch your Sonicare on, it will begin brushing at the
Normal speed setting.To change the speed setting:
C
1 From Normal to Reduced speed: press the Dual Speed Control
button once during brushing.
2 From Reduced to Normal speed: press the Dual Speed Control
button a second time during brushing.
A distinctive two-tone beep indicates that the speed setting has been
changed.
It is recommended that you brush at the Normal speed setting to
maintain optimal results.
ENGLISH
10