Philips Showline MCP9350I, Quick Install Manual

Page: 38 / 100

38
Rear view
3 6 4
5
10
15 14
16 17 18 19 20
7 8 9
12 11 13
1 2
1 RF IN - FM - Radio
For connecting to the antenna system or to a roof-
mounted FM antenna (with an impedance of 75 W
(ohm).
2 RF IN - TV
For connecting to the cable antenna system.
3 VIDEO IN
1
- S-Video
Video input socket for connecting to the S-Video output
socket of a TV, cable/satellite set-top box, DVD
player/recorder, etc.
4 VIDEO IN
1
-Video (CVBS)
Video input socket for connecting to the CVBS (compo-
site video) output socket of a TV, cable/satellite set-top
box, DVD player/recorder, etc.
5 AUDIO IN
1
Stereo audio input sockets for connecting to the audio
output sockets of a cable/satellite set-top box, DVD
player/recorder, audio equipment, etc.
6 S-VIDEO OUT
Output socket for connecting to the input socket of
S-Video enabled recording devices (DVD,VCR) or an
S-Video enabled TV.
7 DVI OUT
DVI-D (Digital Video Interface-Digital only) output soc-
ket for connecting to the DVI-D input socket of a DVI-
D enabled monitor or flat screen TV.
8 LAN
For connecting to your local area network (LAN).
9 DIGITAL AUDIO - Optical - Out
Optical output socket for connecting to the optical
input socket of a receiver,TV or recording device (CD
recorder,VCR, etc.).
10 AC-INPUT (100-240V - 50/60Hz)
For connecting the Media Center to the mains.
11 VIDEO IN
2
- S-Video
Video input socket for connecting to the S-Video output
socket of a TV, cable/satellite set-top box, DVD
player/recorder, etc.
12 VIDEO IN 2 - Video (CVBS)
Video input socket for connecting to the CVBS (compo-
site video) output socket of a TV, cable/satellite set-top
box, DVD player/recorder, etc.
13 AUDIO IN 2
Stereo audio input sockets for connecting to the audio
output sockets of a cable/satellite set-top box, DVD
player/recorder, audio equipment, etc.
14 IR (infrared) BLASTER (2 x)
For connecting an IR (infrared) blaster in order to select
channels on your cable/satellite set-top box via the
Media Center remote control.
15 1394 (Firewire / i.LINK) - 6-pin(2 x)
For connecting to IEEE 1394 / Firewire / i.LINK compa-
tible peripherals and devices such as an external hard
disk that requires two additional pins for power supply..
16 VGA
For connecting to a VGA (Video Graphics Array) enab-
led monitor or flat screen TV.
17 USB 2.0 (2 x)
For connecting USB 1.1 and 2.0 enabled devices.
18 DIGITAL AUDIO - COAXIAL - Out
Coaxial output socket for connecting to the coaxial
input socket of a receiver or recording device (e.g a
DVD recorder).
19 AUDIO OUT (2 x)
Stereo audio output sockets for connecting to the audio
input sockets of a receiver or recording device (e.g a
DVD recorder).
20 SCART (RGB / CVBS)
For connecting to the SCART input connector of a TV.
Note:Wireless LAN antennas (802.11b/g) are already built in in
the set so there is no need for connecting a wireless USB
adapter in order to integrate the Media Center in your
wireless netwerk.
MCP9350i-23_EN.qxd 04-04-2006 09:09 Pagina 38