4
EN
3 Get started
Charge your headset
Note
•
Before you use your headset for the first time, charge
the battery for 5 hours for optimum battery capacity
and lifetime.
•
Use only the original USB charging cable to avoid any
damage.
•
Finish your call before charging the headset, as
connecting the headset for charging will power the
headset off.
Connect the supplied USB charging cable to:
•
the USB connector of the headset and;
•
USB power source.
»
LED turns white during charging and
turns off when the headset is fully
charged.
Tip
•
Normally, a full charge takes 3 hours.
•
When your battery is empty, you can carry on listening
music with an audio cable. Make sure the headset is off
(and not in idle mode) before using this audio cable.
Pair the headset with your
mobile phone
Before you use the headset with your mobile
phone for the first time, pair it with a mobile
phone. A successful pairing establishes a unique
encrypted link between the headset and mobile
phone. The headset stores the last 8 devices
in the memory. If you try to pair more than 8
devices, the earliest paired device is replaced by
the new one.
There are two ways to pair your headset with
your mobile phone:
•
Manual pairing
•
NFC pairing
Manual pairing
1
Make sure that the mobile phone is turned
on and its Bluetooth feature is activated.
2
Make sure that the headset is fully charged
and turned off.
3
Press and hold until the blue and white
LED flashes alternately.
»
The headset remains in pairing mode
for 5 minutes.
4
Pair the headset with the mobile phone.
For detailed information, refer to the user
manual of your mobile phone.
NFC pairing
1
Make sure that the mobile phone is turned
on.
2
Make sure that the headset is fully charged
and turned off.
3
Press and hold until the blue and white
LED flashes alternately..
4
Make sure you turn on the NFC function
on your phone and your phone’s screen
remains active.
5
Place your phone over the headset so that
the NFC detection area of each device can
touch each other.
Note
•
Make sure your mobile phone has the NFC feature
available and switched on.
•
Make sure your mobile phone is not in standby mode.
•
Pairing with NFC is only suitable for Android mobile
operating system 4.2 or above.
•
Refer to the user manual of your mobile phone to
identify its NFC detection area.
Summary of Contents for SHB9150
Page 2: ......
