Philips Senseo HD7855, User Manual

Page: 12 / 52

12
9.1.1 Flushing cycles:
1
Rinse and fill the water reservoir with fresh
water until the MAX indication. Place it back
onto the machine (Fig. 3).
2
Press the CALC button to start the flushing
cycle. The water flows continuously for
approximately 5 minutes.
3
Wait until the machine has completed the
flushing cycle. The on/off button flashes quickly
and the CALC button flashes slowly.
4
Empty the bowl and place it back under the
spout.
5
Repeat steps 1 to 4 twice to complete the
flushing procedure. When the last flushing
cycle is complete, the machine switches off
automatically.
10 Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the
worldwide guarantee leaflet for contact details).
11 Environment
•
Do not throw away the machine with the
normal household waste at the end of its life,
but hand it in at an official collection point for
recycling. By doing this, you help to preserve
the environment (Fig. 47).
3
Press the on/off button. The on/off button
flashes slowly while the water heats up. The
machine is ready for descaling when the on/
off button lights up continuously. (Fig. 8)
4
Place the 1-cup pod holder
q
with a used
coffee pod in it in the machine. Close the lid
and make sure it is properly locked. (Fig. 45)
D
Note:
Always put a used coffee pod in the pod
holder when you descale the machine. This
pod serves as a ‘filter’ to prevent the sieve or
hole in the pod holder from getting clogged
with scale residue.
B
Warning:
Make sure the lid is closed properly and the
lid lever is locked before you start descaling
the machine.
5
Put a bowl with a capacity of at least 1 litre
under the spout to collect the descaling
solution. (Fig. 6)
6
The machine is ready for descaling when
the on/off button and CALC button light up
continuously. Press the CALC button until the
machine beeps twice to start the descaling
cycle (Fig. 46).
7
The descaling cycle is in progress. During the
descaling cycle, the descaling solution comes
out of the machine in intervals. During the
last 5 minutes the descaling solution flows
continuously.
B
Warning:
Do not interrupt the descaling cycle.
8
When all the descaling solution in the
water reservoir has been used up after
approximately 50 minutes, the on/off button
flashes quickly and CALC button flashes
slowly.
9
Empty the bowl and place it back under the
spout.
10
Remove the used coffee pod from the pod
holder.