background image

11 Lid
12 Battery compartment
13 RESET button

Resets all user settings to the default factory settings.

14 VOLUME control

Adjusts the volume.

15 Tone/Pulse selector

Selects between tone dialling and pulse dialling. Always use tone dialling
unless your telephone company only support pulse dialling.

16 Loudspeaker
17 Extractable antenna
18 PHONELINE OUT socket

Connects the unit to the telephone.

19 PHONELINE IN socket

Connects the unit to the telephone network.

20 DC 9V 

—<± 

socket

DC power supply socket for connection to the mains.

21 AC power adapter

B) Parent Unit 

(Only for Regular baby monitor use)

22 Charging light

Lights up red when the unit battery is being charged.

23 Charging base
24 SYSTEM CHECK light

– Lights up green when the units have proper contact.
– Flashes red when the units are out of range or when connection is

not reliably anymore.

25 Loudspeaker
26 Sound level lights

Visually indicate baby's sounds.

27 Antenna
28 Power light

– Lights up green when the unit is switched on.
– Flashes red when batteries are almost empty.

29 VOLUME control and ON/OFF switch

Switches the unit on and controls the volume.

30 CHANNEL selection switch

Selects the required channel.

31 SYSTEM CHECK ALARM switch

Switches the System Check Alarm on and off.
The alarm beeps when the units are not in contact.

32 Battery compartment
33 DC 9V 

—<± 

socket

DC power supply socket for connection to the mains

34 AC power adapter

ENGLISH

6

Summary of Contents for SBC SC469





















Reviews: