Problem
Possible cause
Solution
Interference or
Mobile or cordless phones too
Move phones away from the units.
poor reception
close to the baby monitor.
Pick-up from
Both systems are operating on
Switch channels.
another baby
the same frequency.
monitor
Baby Unit cannot
Telephone line not present
Check telephone line connection,
switch to Dial-up
(
icon on display is on).
(
must be off).
mode
Baby Unit does
Dial-up mode not selected
Use the MODE button (10) to select
not dial a
(
icon on display is not on).
Dial-up mode.
telephone
number
Telephone line not present
Check telephone line connection,
(
icon on display is on).
(
must be off).
‘Sensitivity time’ too long.
Set shorter ‘sensitivity time’.
No ‘call-up’ phone number(s)
Store at least one ‘call-up’ phone
stored in the memory.
number. See ‘Installing the Baby Unit
for use in ‘Dial-up mode’.
No ‘call-up’ phone number
Select ‘call-up’ phone number. See
selected.
Setting the Baby Unit to Dial-up mode.
Baby Unit does
Wrong PIN code entered.
Redial and enter correct PIN code.
not recognise
PIN code
Your telephone is in pulse dial
Set telephone to tone dial mode. See
mode.
the instructions for use of your
telephone. Use a tone dial telephone
or a mobile telephone.
The telephone used is a pulse
Use a tone dial telephone or a mobile
dial telephone.
telephone.
No PIN code stored in the
Store PIN code. See ‘Installing the
memory.
Baby Unit for use in Dial-up mode’.
Baby Unit does
The telephone used is a pulse
Use a tone dial telephone.
not answer an
dial telephone.
incoming call
Baby Unit
Your telephone network does not Set TONE/PULSE selector (15) to
does not dial
recognise dialling pulses.
Tone or use a mobile telephone.
correct number
ENGLISH
17
