ENGLISH
10
Using batteries
Operating the Baby Unit cordlessly
1
Remove the battery compartment cover (9), using a coin.
2
Insert four 1.5V AA batteries noting the + and - configuration inside the
battery compartment.
Batteries are not included; we recommend non-rechargeable Philips alkaline
batteries.
3
Put the cover (9) back in place and secure, using a coin.
> The Baby Unit operates cordlessly for up to 30 hours on fresh batteries.
The POWER light (4) lights up red when battery power is low. If this
happens install new batteries.
Note: Do not use rechargeable batteries. The Baby Unit will not function on
rechargeable batteries.
Operating the big Parent Unit cordlessly
1
Open the battery compartment cover (18), using a screwdriver.
2
Insert four 1.5V AA batteries noting the + and - configuration inside the
battery compartment.
Batteries are not included; we recommend non-rechargeable Philips alkaline
batteries.
3
Put the cover (18) back in place and secure), using a screwdriver.
> The big Parent Unit operates cordlessly for up to 30 hours on fresh
batteries.The Power light (4) flashes red when battery power is low.
If this happens install new batteries.
Notes:
–
Do not use rechargeable batteries.
The Baby Unit will not function on rechargeable batteries.
–
When rechargeable batteries are used in the Baby Unit,
they will not be charged.
–
As soon as the batteries are inserted, battery back up will be activated.
In the event of mains failure during mains operated use, the unit will
automatically switch to battery operated use. As soon as the mains supply is
back on, the unit switches to mains operated operated use again.
OP
EN
-
SENSITIVITY
+
4
3
5
-
SENSITIVITY
+
4
3
5
