Philips Saeco PICOBARISTO SM3054 User Manual Download Page 26

Page: 26 / 28

Problem

Cause

Solution

The AquaClean filter does
not fit.

You need to remove air from
the filter.

Let air bubbles come out of the filter.

There is still water in the water
tank.

Empty the water tank before you install
the filter.

You are trying to install another
filter than the AquaClean filter.

Only the AquaClean filter fits into the
machine.

The rubber o-ring is not
attached to the AquaClean
filter.

Check the packaging for the o-ring and
attach it to the AquaClean filter.

There is water under the
machine.

The drip tray is too full and has
overflowed.

Empty the drip tray when the 'drip tray
full' indicator pops up through the drip
tray. Always empty the drip tray before
you start descaling the machine.

The machine is not placed on a
horizontal surface.

Place the machine on a horizontal
surface so that the 'drip tray full'
indicator works properly.

English

Summary of Contents for Saeco PICOBARISTO SM3054





























Search results

Summary of Contents for Saeco PICOBARISTO SM3054

Reviews:

Related manuals for Saeco PICOBARISTO SM3054

Brands by name

Popular brands

Philips Saeco PICOBARISTO SM3054, User Manual

Search results

Summary of Contents for Saeco PICOBARISTO SM3054

Reviews:

Related manuals for Saeco PICOBARISTO SM3054

Brands by name

Popular brands