Philips Saeco Moltio HD8766 User Manual Download Page 57

Page: 57 / 68

ENGLISH

Warning Signals (Yellow Colour)

The machine is heating up to brew beverages or dispense hot water.

The machine is performing the rinse cycle. Wait until the machine has com-
pleted the cycle.

The machine needs the “” water fi lter to be replaced.

The brew group is being reset due to machine reset.

Refi ll the coff ee bean hopper with coff ee beans and restart the cycle.

Prime the circuit.

The machine needs to be descaled. Press the “

” button to start the descal-

ing process. Follow the steps described in the descaling chapter of this
manual.
If you want to descale later, press the “

” button to continue using the

machine.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.

Summary of Contents for Saeco Moltio HD8766





































































Search results

Summary of Contents for Saeco Moltio HD8766

Reviews:

Related manuals for Saeco Moltio HD8766

Brands by name

Popular brands

Philips Saeco Moltio HD8766, User Manual

Search results

Summary of Contents for Saeco Moltio HD8766

Reviews:

Related manuals for Saeco Moltio HD8766

Brands by name

Popular brands