Philips Saeco Moltio HD8766, User Manual

Page: 51 / 68

49
ENGLISH
49
Y
ello
w
20 When the amount of water needed for the rinse cycle has been
completely dispensed, this icon on the side is displayed. Press the " "
MENU button to quit the descaling cycle.
21
Press the“ ” button to prime the circuit.
22
The machine now carries out the warm-up and automatic rinse cycle to
prepare for product brewing.
Gr
een
18
When the water tank is empty, remove the water tank, rinse it and fi ll it
up to the MAX level with fresh water. Place it back into the machine.
19
Empty the container and place it back under under both the steam/hot
water wand and the dispensing spout.
23 Remove and empty the container
24 Empty the drip tray and place it back.
25 The descaling cycle is now complete.
26 Remove the small white water fi lter and place back the “”
water fi lter into the water tank if it was installed and the Classic Milk
Frother.
Note:
At the end of the descaling cycle, wash the brew group as described in the
“Weekly Cleaning of the Brew Group” chapter.
The two rinse cycles are performed in order to have the circuit cleaned
with a preset amount of water and ensure proper machine operation. If the
water tank is not fi lled up to MAX level, the machine might require three or
more cycles.