Philips Saeco Intelia HD8751 User Manual Download Page 6

Page: 6 / 56

ENGLISH

IMPORTANT

Safety Instructions

This machine is equipped with safety features. Nevertheless
read the safety instructions carefully and only use the ma-
chine as described in these instructions to avoid accidental
injury or damage.
Keep this user manual for future reference.

The term

WARNING

and this icon warn against possible

severe injuries, danger to life and/or damage to the machine.

The term

CAUTION

and this icon warn against slight

injuries and/or damage to the machine.

This icon requests to read carefully this instruction manual,
before performing any use or maintenance operation.

Warning

• Connect the machine to a wall socket with a voltage

matching the technical specifi cations of the machine.

• Do not let the power cord hang over the edge of a table or

counter, or touch hot surfaces.

• Never immerse the machine, mains plug or power cord in

water (danger of electrical shock!).

• Never direct the hot water jet towards body parts: danger

of burning!

• Do not touch hot surfaces. Use handles and knobs.

Summary of Contents for Saeco Intelia HD8751

























































Search results

Summary of Contents for Saeco Intelia HD8751

Reviews:

Related manuals for Saeco Intelia HD8751

Brands by name

Popular brands

Philips Saeco Intelia HD8751, User Manual

Search results

Summary of Contents for Saeco Intelia HD8751

Reviews:

Related manuals for Saeco Intelia HD8751

Brands by name

Popular brands