English
3
Press to open the SmartClean system cap, to be
able to place the shaver in the holder ('click').
4
Hold the shaver upside down above the
holder. Make sure the front of the shaver points
towards the SmartClean system holder.
5
Place the shaver in the holder, tilt the shaver
backwards and press down the SmartClean
system cap to connect the shaver (‘click’).
The battery symbol starts to flash to indicate
that the appliance is charging. When the battery
is fully charged, the battery symbol lights up
continuously.
Using the shaver
Always check the shaver and all accessories
before use. Do not use the shaver or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with one
of the original type.
- Use this shaver for its intended household use
as described in this manual.
- For hygienic reasons, the shaver should only be
used by one person.
- Trimming is easier when the skin and hair are
dry.
- Do not place the SmartClean near water and
make sure it does not get wet.
1
2
3
32
s6680̲26̲en̲a6̲cs6̲0220.indd 32
2019/02/19 12:08
