1
1. Important
1. Important
This electronic user’s guide is intended for
anyone who uses the Philips monitor. Take
time to read this user manual before you
use your monitor. It contains important
information and notes regarding
operating your monitor.
The Philips guarantee applies provided
the product is handled properly for
its intended use, in accordance with
its operating instructions and upon
presentation of the original invoice or cash
receipt, indicating the date of purchase,
dealer’s name and model and production
number of the product.
1.1 Safety precautions and
maintenance
Warnings
Use of controls, adjustments or procedures
other than those specified in this
documentation may result in exposure
to shock, electrical hazards and/or
mechanical hazards.
Read and follow these instructions when
connecting and using your computer
monitor.
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Adjustment of the equalizer to maximum
increases the earphones and headphones
output voltage and therefore the sound
pressure level.
Operation
•
Please Keep the monitor out of
direct sunlight, very strong bright
lights and away from any other heat
source. Lengthy exposure to this
type of environment may result in
discoloration and damage to the
monitor.
•
Keep the display away from oil. Oil
may damage the plastic cover of the
display and void the warranty.
•
Remove any object that could fall into
ventilation holes or prevent proper
cooling of the monitor’s electronics.
•
Do not block the ventilation holes on
the cabinet.
•
When positioning the monitor, make
sure the power plug and outlet are
easily accessible.
•
If turning off the monitor by
detaching the power cable or DC
power cord, wait for 6 seconds before
attaching the power cable or DC
power cord for normal operation.
•
Please use approved power cord
provided by Philips all the time. If your
power cord is missing, please contact
with your local service center. (Please
refer to Service contact information
listed in Important Information
Manual.)
•
Operate under the specified power
supply. Be sure to operate the monitor
only with the specified power supply.
Use of an incorrect voltage will cause
malfunction and may cause fire or
electric shock.
•
Protect the cable. Do not pull or bend
the power cable and signal cable.
Do not place the monitor or any
other heavy objects on the cables, if
damaged, the cables may cause fire or
electric shock.
•
To avoid potential damage, for
example the panel peeling from the
bezel, ensure that the monitor does
not tilt downward by more than -5
degrees. If the -5 degree downward
tilt angle maximum is exceeded, the
monitor damage will not be covered
under warranty.
