10
2. Setting up the monitor
Height adjustment
130mm
Pivot
90
°
-90
°
0
°
0
°
Warning
•
To avoid potential screen damage,
such as panel peeling, ensure that the
monitor does not tilt downward by
more than -5 degrees.
•
Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the monitor
base, please follow the instructions below
to avoid any possible damage or injury.
242S9AL/242S9JAL
1. Place the display face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
242S9AL
242S9JAL
2. Loosen the assembly screws, then
detach the neck from the monitor.
242S9AL
242S9JAL
