Philips RQ1090/20, User Manual

Page: 11 / 202

Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
Clean the shaver after every shave for optimal shaving performance.
You can clean the outside of the shaver with a damp cloth.
Regular cleaning guarantees better shaving performance.
Cleaning the shaving unit under the tap
Switch off the shaver.
Pull open the three shaving heads one by one (Fig. 7).
Rinse all three shaving heads and all three hair chambers under a
hot tap for 0 seconds. (Fig. 8)
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
4 Carefully shake off excess water and leave the shaving heads open
to let the shaving unit dry completely.
Never dry the shaving unit with a towel or tissue, as this may damage
the shaving heads.
For thorough cleaning, switch on the shaver and immerse the
shaving unit in hot water with some liquid soap for 0 seconds. You
can also clean the shaving unit with some alcohol (Fig. 9).
Cleaning the shaving unit with the brush supplied
Switch off the shaver.
Pull open the three shaving heads one by one (Fig. 7).
Clean the shaving heads and the hair chambers with the brush
supplied (Fig. 0).
4 Close the shaving heads.
-
-
-
-
,
English