Philips RQ1075, User Manual

Page: 9 / 268

travel lock
You can lock the shaver when you are going to travel. The travel lock
prevents the shaver from being switched on by accident.
activating the travel lock
1 Press the on/off button for seconds to enter the travel lock
mode (Fig. 19).
The lock symbol appears on the display (all types) and you hear a
beep (RQ1090 only) to indicate that the travel lock has been
activated.
Note: The displays of types RQ1062, RQ1060, RQ1052 and RQ1050 look
different but show the same indication.
Deactivating the travel lock
1 Press the on/off button for seconds.
The motor starts running to indicate that the travel lock has been
deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in Power Pod or Jet Clean
System, the travel lock is automatically deactivated.
Blocked shaving heads
If the shaving heads are blocked, the shaving unit symbol and the tap
symbol with exclamation mark flash. In this case, the motor cannot
run because the shaving heads are soiled or damaged. (Fig. 20)
Note: The displays of types RQ1062, RQ1060, RQ1052 and RQ1050 look
different but show the same indication.
When this happens, you have to clean the shaving unit or replace it.
The shaving unit symbol and the tap symbol with exclamation mark
continue to flash until you unblock the shaving heads.
Charging
Charging takes approx. 1 hour.
,
,
-
-
-
English
11