Philips RQ1075, User Manual

Page: 16 / 268

Replacement
Replace the shaving unit when the shaving unit symbol appears on the
display. Replace a damaged shaving unit right away.
For maximum shaving performance, we advise you to replace the shaving
unit every two years.
Only replace the shaving unit with an original RQ10 Philips
arc
itec Shaving Unit.
1 Pull the old shaving unit off the shaver (Fig. 27).
2 Insert the lug of the new shaving unit into the slot in the top of the
shaver (1). Then press the shaving unit downwards (2) to attach it
to the shaver (‘click’) (Fig. 29).
Ordering parts
The following parts are available:
HQ8500 adapter
RQ10 Philips arc itec Shaving Unit
HQ110 Philips Shaving Head Cleaning Spray
HQ200 Philips Cleaning Fluid
Environment
Do not throw away the appliances with the normal household waste
at the end of their life, but hand them in at an official collection point
for recycling. By doing this, you help to preserve the
environment (Fig. 45).
The built-in rechargeable shaver battery contains substances that may
pollute the environment. Always remove the battery before you
discard or hand in the shaver at an official collection point. Dispose of
the battery at an official collection point for batteries. If you have
trouble removing the battery, you can also take the appliance to a
Philips service centre. The staff of this centre will remove the battery
for you and will dispose of it in an environmentally safe way.
Disposal of the shaver battery
Only remove the battery when you discard the shaver. Make sure the
battery is completely empty when you remove it.
-
-
-
-
-
-
English
18