background image

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be 
followed, including the following:

1. 

Read all instructions.

2. 

Do not touch hot surfaces. Use handles or knobs.

3. 

To protect against fire, electric shock and injury to persons do not immerse 
cord, plugs, or appliance in water or other liquid.

4. 

Close supervision is necessary when the appliance is used by or near 
children.

5. 

Unplug from outlet when not in use and before cleaning. Allow to cool 
before putting on or taking off parts, and before cleaning the appliance.

6. 

Do not operate any appliance with a damaged cord or plug or after the 
appliance malfunctions, or has been damaged in any manner. Return 
appliance to the nearest authorized service facility for examination, repair 
or adjustment.

7. 

The use of accessory attachments not recommended by the appliance 
manufacturer may result in fire, electric shock or injury to persons.

8. 

Do not use outdoors.

9. 

Do not let cord hang over edge of table or counter, or touch hot surfaces.

10. 

Do not place on or near a hot gas or electric burner, or in a heated oven.

11. 

Always attach plug to appliance first, then plug cord into wall outlet. To 
disconnect, turn any control to “off”, then remove plug from wall outlet.

12. 

Do not use appliance for other than intended use.

13. 

Save these instructions. 

SAVE THESE INSTRUCTIONS

Summary of Contents for Royal Gran Crema HD8920





































































Reviews: