24
5.3.5 ‘Zone-completed’ sound
•
The device produces a sound when the right
laser dose has been applied to a zone. After
the sound, the device goes into standby for 4
seconds and you can move it to another zone.
D
Note:
Always continue treatment until you hear the
‘zone-completed’ sound. not doing so will lead
to uneven treatments and suboptimal results.
5.3.3 Red skin contact light
•
If the application tip does not light up red, it
is not in full contact with the skin. Place the
application tip on the skin so that the contact
pins are in full contact with the skin. You can
apply a bit more laser performance gel to
improve skin contact.
5.3.4 Treatment lights and humming sound
•
Continuous green light and humming sound:
laser energy is being applied continuously. This
means you have good skin contact, the device
is at the right angle and you move it at the
right speed.
•
Flickering green light and humming sound: the
laser is interrupted. Make sure the application
tip has full skin contact, is at the right angle
and is being moved at the right speed.
90°
90°
