4
Remove the cutting unit by pushing against the teeth of the cutting
unit and clean it with the brush or rinse it under the tap.
5
Shake off excess water and place the cutting unit back by inserting
the lug of the cutting unit into the guiding slot.
6
Push the cutting unit back onto the appliance (‘click’).
Replacement
Only replace a worn or damaged cutting unit with an original Philips cutting
unit, available from authorised Philips service centres.
1
Open the cutting unit.
2
Remove the old cutting unit by pushing against the teeth of the
cutting unit.
3
Insert the lug of the new cutting unit into the guiding slot.
4
Push the cutting unit back onto the appliance (‘click’).
English
8
Summary of Contents for QT4011
Page 2: ...1 ...
Page 116: ...8222 002 0035 1 ...