6
EN
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
laser exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Power supply
Either AC power or battery can be used as
power supply of this product.
Option 1:AC power
Warning
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the product.
•
Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
1
Connect one end of the AC adaptor to
the
DC IN
socket on the back of the
product.
2
Connect the other end of the AC adaptor
to the wall outlet.
Warning
•
To save energy, turn off the product after use.
Option 2: Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Batteries contain chemical substances, so they should
be disposed of properly.
Note
•
Batteries are not supplied with the accessories.
1
Open the battery compartment on the
bottom of the product.
2
Insert 8 batteries (type: D/R20 CELL/UM1)
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
