ENGLISH
10
RFX9600 Starter’s Guide
2
Make sure that the PC is switched to
DHCP
while the Extender is in configuration
(normally, this should already be the case).
3
Set the
Configuration switch
to
2 for configuration
:
The Extender will restart. After start-up, the Power and Ethernet LEDs are green and the Busy
LED is red/green blinking.
4
Open the
browser
.
5
Type the
IP address
of the Extender in the address bar of the browser: 192.168.8.80.
(This is also printed on the back of the Extender.)
You may have to refresh the browser before the
Configuration Tool
appears.
6
Make sure you have the
IP address and netmask
at hand, and follow the onscreen
instructions.
7
When the configuration is completed,
disconnect
the Extender from the computer and
reconnect it to the router with a straight Ethernet cable. Set the Configuration switch
to 1 for use.
Configuration through a router
1
The Extender is already
connected to the router.
Connect
the router to the PC
as well.
2
Set the
Configuration switch
to
3 for configuration
:
The Extender will restart. After start-up, the Power and Ethernet LEDs are green and the Busy
LED is red/green blinking.
3
Open
ProntoEdit Professional
on the PC.
4
In the
Tools
menu, select
Extender Discovery
.
The Extender Discovery tool appears, with a list of all the detected Extenders in the Pronto
Network.
Configuration switch: 2
Configuration switch: 3
Extender
Straight
Ethernet cable
Router
RFX9600_SG_ESFv3.qxd 07-09-2006 15:38 Pagina 13
Summary of Contents for Pronto RFX9600
Page 1: ...RFX9600 Starter s Guide Manual de inicio Guide de démarrage FR ES EN ...
Page 2: ......
Page 48: ......
