Power Requirements
7
PLFRESNEL1 LED Luminaires
Installation & User’s Manual
INSTALLATION AND SET UP
1. Power Requirements
The PLFRESNEL1 LED Luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire contains
an auto-ranging power supply. Depending on supply voltage, each luminaire can draw up to 1.5 amps.
WARNING!
*These figures are based on the Maximum Allowable Input Current of 20 Amps (and the maximum
power supply limit of 150 Watts).
Do not overload circuits!
2. Connecting Power
Units can be powered in one of two ways:
• Direct connection to a AC power source using an AC input cable.
• Daisy chain connection using a interconnect AC cable.
If the unit is supplied with an AC input cable but you did not order an AC input connector,
Table 2 on page 8
describes how to connect power to your PLFRESNEL1 LED Luminaire. Field wiring of the PLFRESNEL1 LED
Luminaire is straight forward. A total of 3 wires/conductors need to be brought to the unit. The following wiring
scheme is required:
Table 1: PLFRESNEL1 LED Luminaire Voltage vs. Current
Voltage
(AC)
Total
Current (A)
Maximum
number of
units that can
be linked
together*
Voltage
(AC)
Total
Current (A)
Maximum
number of
units that can
be linked
together*
100
1.50
13
180
0.83
24
110
1.36
14
190
0.79
25
120
1.25
16
200
0.75
26
130
1.15
17
210
0.71
28
140
1.07
18
220
0.68
29
150
1.00
20
230
0.65
30
160
0.94
21
240
0.63
32
170
0.88
22
IMPORTANT AC POWER CONNECTION NOTES:
a. When using the daisy-chain connection method, ONLY connect PLFRESNEL1 LED Luminaires to
AC Output Connection of PLFRESNEL1 LED Luminaires. DO NOT CONNECT OTHER TYPES
OF LUMINAIRES OR DEVICES!
b. Use only use approved cable types.
c. Do not overload circuits!
d. Do not connect PLFRESNEL1 LED Luminaires to dimmed circuits.
e. The MAXIMUM allowable number of PLFRESNEL1 LED Luminaires which can be 'daisy-
chained' on one power feed are listed in
Table 1
, above. DO NOT EXCEED!
