Philips PicoPix Micro 2 User Manual Download Page 16 | Manualshive

Page: 16 / 20

Philips PicoPix Micro 2 User Manual Download Page 16

16

Philips · PicoPix Micro 2

Problems

Solutions

No sound from the external connected
device.

• Check the cables to the external device.
• Check that the sound is activated on the external

device.

• Only the original cables from the device

manufacturer may function.

No sound from external HDMI output
device.

• On the HDMI output device, set the audio setting

to Stereo (PCM).

No sound when you connect your
computer via HDMI cable.

• Check that the sound is activated on the computer

and set to output to the projector.

The projector does not react to remote
control commands.

• Check the batteries of the remote control.

The temperature of the projector’s surface
is warm.

• For this projector it is normal to generate

moderate heat during operation.

What to do if the projector does not work
when connecting to a notebook PC?

• Check that the HDMI cable is plugged in correctly.
• Make sure that the notebook PC has been

switched to projector display.

«
...
14
15
16
17
18
...
»

Summary of Contents for PicoPix Micro 2





















Reviews:

No comments