EN 33
En
gl
is
h
Change the clock mode
You can change the clock mode to
automatic or manual. By default, it is set to
automatic mode, which automatically
synchronizes it to Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
[Manual]
.
1. While you watch TV, press .
2. Select
[Setup]
>
[TV settings]
>
[General
settings]
.
3. Select
[Clock]
>
[Auto clock mode]
.
4. Select
[Automatic]
,
[Manual]
or
[Country
dependent]
, then press
OK
.
Enable or disable daylight saving time
You can enable or disable daylight saving
time depending on your region. Before you
enable or disable daylight saving time, set the
clock mode to
[Auto clock]
>
[Manual]
.
1. In the
[Clock]
menu, select
[Daylight
saving]
.
2. Select
[Daylight saving time]
or
[Standard
time]
, then press
OK
.
Daylight saving time is enabled or disabled.
Set the clock manually
You can set the date and time manually.
Before you start, set the clock mode to
[Manual]
.
1. In the
[Clock]
menu, select
[Date]
or
[Time]
, then press
OK
.
2. Use the
Navigation buttons
to make your
selection.
3. Select
[Done]
, then press
OK
.
Sleeptimer
You can switch the TV to standby after a
specified time. During the countdown to the
specified time, you can switch off your TV
earlier or reset the sleep timer.
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[General
settings]
>
[Sleep timer]
.
3. Press the
Navigation buttons
to set the
sleep timer.
The sleep timer can be set up to 180
minutes, in steps of ten minutes. To switch
off the sleep timer, set it to zero minutes.
4. Press
OK
to activate the sleep timer.
After the specified time, the TV switches to
standby.
Child lock
To protect children from unsuitable TV
programs, you can lock the TV or block age
rated programs.
Set or change the child lock code
1. Press .
2. Select
[Setup]
>
[Channel settings]
>
[Child lock]
.
3. Select
[Set code]
or
[Change code]
.
4. Enter the code with the
Numeric
buttons
.
Tip:
If you forget your code, enter ‗8888‘ to
override any existing codes. f you access the
channels from the channel list, you are
prompted to enter your lock code. If you
forget your code, enter ‗8888‘ to override
any existing codes.
Age rating
You can set your TV to display only
programs with age ratings lower than your
child‘s age. This restriction only applies to
digital channels from broadcasters that rate
their programs according to age.
1. Press .
2. Select
[Setup]
>
[Channel settings]
.
3. Select
[Child lock]
>
[Age ratings lock]
.
You are prompted to enter the child lock
code.
4. Enter the child lock code with the
Numeric buttons
.
5. Select an age rating, then press
OK
.
All programs above the selected age rating
are blocked.
For information on child lock codes, see
Use
more of your TV > Set locks and timers >
Child lock
(Page
33
).
